Poly Toggle 5/8" uses # 6 to # 12 Screws Powers Fasteners #02305 (Box of 100)

Description

Powers Fasteners - 5/8" Poly Toggle - uses # 6 to # 12 Screws (Box of 100)
To look at more option
Please go to KOL Business Group Store or copy the link
https://www.ebay.com/str/KOL-Business-Group?_trksid=p2047675.l2563
Shipping   -   Handling 1 Day   Transit 2-3 Days
Poly-Toggle® Plastic Hollow Wall Anchor
PRODUCT DESCRIPTION
The Poly-Toggle is a screw actuated hollow wall anchor for use in paneling, wallboard, and solid masonry. The Poly-Toggle anchor is available in 6 sizes to match the most common wall thicknesses of hollow base materials. In solid base materials, the anchor can be used by removing the outer wings.
FEATURES AND BENEFITS
• Allows for fixture and screw removal and re-anchoring
• Federal GSA Specification – Meets the descriptive requirements of FF-B-588D, Type IV (superseded)
MATERIAL SPECIFICATIONS
Anchor Body
-
Engineered Plastic
Screw
Carbon Steel – ANSI 18.6.4
Screw Plating
ASTM B633, SC1, Type III, (Zn/Fe 5) A
Installation Guidelines
Drill 5/16" diameter hole through base material. Select the proper size PolyToggle based on the wall thickness. Squeeze the Poly-Toggle flat and push into the hole.
Tap the Poly-Toggle through the wall until the flange is seated flush against the outer wall.
Position the fixture, insert the screw through the fixture into the Poly-Toggle, and tighten until it feels secure.
Solid Base Materials – For installations in solid base materials, break off the outer wings.
Squeeze the inner wings flat, and insert the PolyToggle into the anchor hole. Insert the screw through the fixture and tighten.