Izh Baikal MP-60 / 61 / 53 gas ram (nitro piston) + piston seal

Description

Baikal Izh-60 / Izh-61 / MP-60 / MP-61 / Izh-53M / MP-53M gas ram / nitro piston + polyurethane piston seal.
Maintenance every 10000 shots recommended. High quality spring.
Force 45 kg. Pressure - 95 atm.
When you use more powerful, overfilled gas ram, you damage your airgun and optics. Our gas ram's force is OPTIMAL = MAXIMUM for this airgun.
Lot includes gas ram, centering shim and piston seal.
Advantages of gas rams:
1. Long lifetime
2. Airgun may be cocked for a long time and it is not harmful for gas ram
3. Strict direction of compression
4. No clang, no vibration - soft recoil
5. Shot is more quiet than with standart spring
Installation
1. Disassemble device in accordance with instructions
2. Remove standart spring and weighting (if it's there)
3. Install gas ram into the piston to the bottom. Body of gas ram inside the piston!
4. Install steel shim to the rear (butt) part of your device.
5. Assembly in reverse order. Press gas ram only installed inside your airgun, using special device (clamp). You can make the clamp with available materials. The rod of gas ram
needs to be in the groove.
Important information
1. Do not scratch the rod's sufrace. It should be like mirror.
2. Changes to the design are unacceptable
3. Don't press the gas ram outside of airgun (in free state)
4. Excess oil may be extracted on the rod during exploitation
5. For some models manual may be a bit different.