Benjamin akela barrel band 3d printed

Description

These are barrel bands for the Benjamin akela 3d designed and 3d printed by me in PETG material 100% fill and solid
includes barrel band and m3 Allen head screw and nut to affix.
This is intended to correct barrel droop that can happen and keeps barrel equal hight off air cylinder and helps raise point of impact on your scope if you run out of elevation due to it drooping to low and just want something more stable than a free floating barrel i recommend using a barrel band of some sort if not this one i designed.
instructions. from split gently open and slide to desired position over barrel and air cylinder slide to where you would like to mount insert m3 screw and tighten down to snug just until screw reaches end of nut i do recommend taking time as to not scratch barrel shroud highly unlikely but in the event i cant be held responsible.
these are very durable but will break if you stretch beyond limits of material i have tested and they can take quite a bit of abuse once mounted it corrects barrel drop that do show up on these air rifle barrels.
personally i recommend mounting flush to the stock as show in image.
air rifle pictured is not included and only for demonstration of product, you will receive the barrel band and m3 mounting hardware only.
all items are individually made and checked defects are highly unlikely and due to the nature no returns or warranty offered sold as is.
currenly only offer in black but if you message me i can do red or white or clear petg material clear is translucent and not optically clear.
due to it being 3d printed allthough very high quality prints there are very small lines that is normal.