Beeman, Sportsman Series Air Rifle, Break Barrel Breech O Ring, 12x (Doz) 70Duro

Description

Beeman
Breech Seal
O-Rings
Sportsman
Series
'Break Barrel' Air Rifles
'
Direct
Fit
' O-Ring replacements for all
Beeman
Sportsman
Series 1000fps Break-Barrel Air Rifles (single and dual-barrel models ( .177 and .22 caliber ). They also fit Shanghia Airgun Models AR1000 and Tech-Force TF89 Models.
(
ª
Note
:
These
O-Rings
are shipped via
USPS
First Class Letter
-
No Tracking
available on this shipping method.
)
(
Attention
:
Check your rifle specifications for recommended replacement 'O-Ring' -
Size
and
Material
.)
Specifications
:
Aerospace
Standard
/ SAC
:
ASTM D2000
Material:
Nitrile
/
Buna-N
(NBR)
Shore 'A' Durometer
(hardness)
:
70
Operating Temperature:
-40
°
to
+450
°
F
Standard
Dimensions
:
*5/16"ID x
**
1/16"CS x
***
7/16"OD
Quantity:
12 (Dozen) pieces
*
Actual
Internal Diameter:
0.301" ID
±.005"   (7.65 mm)
**
Actual
Cross Section:
0.070" CS
±.003"   (1.78 mm)
***
Actual
Outside
Diameter:
0.441" OD
±.005"  (11.21 mm)
( All dimensions & tolerances
are in inches with millimeter equivalent dimensions)
Most Popular List of Compatible
Beeman
Air Rifles
:
(
not all listed
)
Beeman Dual Caliber Air Rifle, Model 1073 (Also known as RS2 or Wal-Mart Beeman Air Rifle)
Beeman
Grizzly X2, Models 1072 and 1073
Beeman
Kodiak X2, Model 1074
Beeman Bear Claw X2, Model 1192
Beeman
Elkhorn X2, Model 1191B
Beeman
Xcel X2, Model 1090
Beeman
Elite X2, Model 1092
Beeman
Teton, Model 1050 and 1051
Beeman
Wolverine Carbine, Models 1070 and 1071
Beeman
Panther, Model 1081
Beeman
Predator, Model 1079
Beeman
Carnivore, Model 1084
Beeman
Ram, Models 1062 and 1064
Beeman
Panther, Model 1081
Beeman
Bear Claw, Model 1086
Beeman
Elkhorn, Models 1067 and 10672
O-Ring Replacement
:
These O-Rings are very easy to replace - just pick out the old O-Ring and push in the new replacement. Check after each shooting session and inspect the O-Ring for possible wear or damage - If so noted replace the O-Ring before storing.
Safety Precautions
:
It is Strongly Recommended that this O-Ring replacement be done by 2 (two) persons. Hold the barrel assembly fully open (as if to load a pellet) at all times while replacing the breech seal O-Ring. Failure to replace O-Ring in this manner could result in serious injury. Be sure O-Ring is fully seated.
ª
Note
:
Shipping is done my
USPS
regular mail via '
Envelope
' -
No
Tracking Number
is Available.
No
returns on this item
.
Pay
Pal
only
Ships
U
S
A
only - to all
50
states.
Thank You